Temporary Protection
Corrosion protection is an essential part of maintaining metal surfaces, especially in industrial and commercial applications. Corrosion protection sprays with temporary protection offer an efficient solution for short-term protection of metals against rust and other corrosive influences. These sprays are ideal for situations where metals only need to be protected from corrosion for a limited period, such as during storage, transport, or between different production steps.
Anti-corrosion wax - 400 ml
Anti-corrosion wax - 400 mlAnti-corrosion wax is used in various applications, including:Automotive industry: Protection of vehicle bodies and frames from rust and corrosion.Marine application: Preservation of ship hulls, boats and marine equipment to protect them from salt water and corrosion.Metalworking: Protection of metal parts, tools and machines against oxidation and rust.Electronics: Application of wax on printed circuit boards or electronic components to protect them from moisture and corrosion.General industry: Protection of machines, equipment and metal structures in various industrial sectors against environmental influences and corrosion.The application of anti-corrosion wax usually requires the following steps:Cleaning: Ensure that the surface is clean and free of dirt, rust or oil. If necessary, use cleaning agents to clean the surface.Preparation: Dry the surface thoroughly before applying the wax to ensure optimum adhesion.Application: Apply the wax evenly to the surface. This can be done by spraying, brushing or dipping, depending on which product you are using.Allow to cure: Allow the applied wax to cure according to the manufacturer's instructions. This may vary depending on the product and ambient temperature.Refinishing: Check the coating as required and apply additional wax if necessary to ensure complete coverage.
from €8.69*
Anti-Seize Ceramic Spray - 400 ml
Polysion Anti-Seize HT1400 is a high-performance, temperature-resistant lubricant. As an assembly spray, it protects against contact corrosion in active metals. has a very good separating effect and is metal-free. Due to its mineral-based active ingredients, it is temperature-resistant up to 1400°C. It prevents seizing and cold welding caused by friction, wear and corrosion. Properties : High temperature resistanceEffective corrosion protection Excellent adhesion and lubrication propertiesPressure resistant Resistant to gases, acids, salts and alkalisPrevents electrochemical corrosion
from €8.82*
Multifunctional Spray PS51
Cleans, protects and maintains in one step. Undermines rust and forms a wafer-thin, antistatic protective film on the surface. Properties : Rust remover, lubricant, contact spray, cleaner and corrosion protection in one Free of silicones and resin Forms a fine protective film
from €4.11*
Contact