Anti-corrosion wax - 400 mlAnti-corrosion wax is used in various applications, including:Automotive industry: Protection of vehicle bodies and frames from rust and corrosion.Marine application: Preservation of ship hulls, boats and marine equipment to protect them from salt water and corrosion.Metalworking: Protection of metal parts, tools and machines against oxidation and rust.Electronics: Application of wax on printed circuit boards or electronic components to protect them from moisture and corrosion.General industry: Protection of machines, equipment and metal structures in various industrial sectors against environmental influences and corrosion.The application of anti-corrosion wax usually requires the following steps:Cleaning: Ensure that the surface is clean and free of dirt, rust or oil. If necessary, use cleaning agents to clean the surface.Preparation: Dry the surface thoroughly before applying the wax to ensure optimum adhesion.Application: Apply the wax evenly to the surface. This can be done by spraying, brushing or dipping, depending on which product you are using.Allow to cure: Allow the applied wax to cure according to the manufacturer's instructions. This may vary depending on the product and ambient temperature.Refinishing: Check the coating as required and apply additional wax if necessary to ensure complete coverage.

Chain and rope spray is usually applied as follows :Cleaning : Clean the chain or rope thoroughly to remove dirt, dust and old lubricant residues. A suitable cleaning agent or cleaning spray can help with this.Drying : Allow the cleaned chain or rope to dry completely before applying the spray.Preparation : Shake the can of chain or rope spray well to mix the ingredients.Application: Spray the spray evenly onto the chain or rope. Maintain a reasonable distance to ensure an even coating. Turn the chain or move the rope to ensure that the spray reaches all areas.Leave to soak in : Leave the spray to soak in according to the manufacturer's instructions. It usually takes a few minutes to penetrate and lubricate. Remove excess : Wipe off any excess spray with a clean cloth to prevent excessive build-up.Follow-up : Check the chain or rope and apply additional spray if necessary, especially after prolonged use or if they have been subjected to heavy wear.Regular application of chain and rope spray helps to extend their service life and maintain their performance. Again, follow the specific instructions for the product for optimal results.Chain and rope sprays are used in various areas :Vehicles : For lubricating and maintaining motorcycle chains, bicycle chains and other drive mechanisms. Industry and mechanical engineering : For maintaining and lubricating industrial chains, conveyor belts, ropes and machine parts to reduce friction and minimise wear.Marine : For lubricating ship rigging, boat winches and other marine applications to prevent corrosion and wear caused by salt water. Agriculture : For the care and lubrication of agricultural machinery, such as tractor chains and other moving parts, to ensure smooth operation. Household and DIY projects : For the maintenance of garage doors, garden tools and other household appliances with moving parts. These sprays serve to reduce friction, extend the service life of the treated parts and prevent corrosion by forming a protective layer.

Polysion Citrus Cleaner degreases quickly and effectively. Dirt, oils, greases, resin, tar, abrasion and much more. Cleans various surfaces such as metals, plastics, painted or coated. Properties : Specially neutral combination of active ingredientsNon-corrosive Effortlessly removes adhesive residues and dirt

Our floor marking tape is the ideal solution for marking traffic routes, storage areas, danger zones and other areas that require clear, highly visible markings. The single-sided adhesive tape is specially designed to create permanent and durable markings. It impresses with its high durability and long service life – even in demanding industrial environments. Whether for indoor or outdoor use, the floor marking tape ensures safety, orientation and order in the workplace. It remains reliably adhesive even under heavy use and provides effective visual guidance.

Die doppelseitig klebenden Polysion Formstanzteile aus Acrylatklebeband eignen sich zum flächigen Verbinden und Befestigen von Bauteilen. Der Acrylatklebstoff ermöglicht die beidseitige Verklebung. Vorgefertigte Konturen erleichtern das genaue Positionieren und unterstützen eine saubere Verarbeitung bei industriellen Montagearbeiten.Die Klebestanzteile nach Maß können nach Zeichnung, Muster oder technischen Vorgaben gefertigt werden. Aussparungen, Anfasslaschen und Abziehhilfen lassen sich je nach Ausführung integrieren. Die vorbereiteten Zuschnitte verringern den manuellen Schneidaufwand und unterstützen wiederholbare Arbeitsabläufe – besonders bei regelmäßig wiederkehrenden Montageaufgaben und in der Serienfertigung.Ihre Vorteile auf einen Blick:Doppelseitig klebend mit AcrylatklebstoffIndividuelle Konturen nach Zeichnung oder Muster möglichVorgefertigte Zuschnitte für eine zügige MontageAussparungen und Abziehhilfen je nach Ausführung integrierbar

Die Polysion Dichtungs- und Formstanzteile aus doppelseitigem Schaumklebeband eignen sich für passgenaue Klebe- und Abdichtungsaufgaben. Der Schaumträger kann leichte Unebenheiten ausgleichen und unterstützt die Anpassung an Bauteiloberflächen. Vorgefertigte Konturen erleichtern das gezielte Positionieren bei der Montage.Die Ausführung Rot kann nach Zeichnung, Muster oder technischen Vorgaben gefertigt werden. Je nach Anforderung sind Aussparungen, Anfasslaschen und Abziehhilfen möglich. Die vorbereiteten Zuschnitte verringern den manuellen Schneidaufwand und unterstützen gleichbleibende Arbeitsabläufe bei wiederkehrenden Montageaufgaben und in der Serienfertigung.Ihre Vorteile auf einen Blick:Doppelseitig klebendes SchaumklebebandPassgenaue Konturen für Montage- und DichtungsaufgabenIndividuelle Fertigung nach Zeichnung oder Muster möglichVorgefertigte Zuschnitte für eine zügige Verarbeitung

Polysion’s Polybent MS polymer adhesive combines elastic bonding and reliable sealing in a single product. This moisture-curing hybrid adhesive bonds to a wide range of materials, including metal, wood, glass, ceramics and PVC. It enables bonding on numerous substrates without the need for a primer and is suitable, for example, for metal construction, mechanical engineering and ventilation and air-conditioning technology. Polybent remains highly flexible and elastic and withstands vibrations. Its UV and weather resistance makes it suitable for outdoor use. The adhesive and sealant is silicone- and isocyanate-free and can be painted over ‘wet-on-wet’ within three hours. It is not suitable for low-energy plastics such as PE and PP. Your benefits at a glance: Bonding and sealing with a single productHighly flexible, elastic and vibration-resistant Adhesion to porous, smooth and wet surfacesUV- and weather-resistant for outdoor use

Pressure-resistant anaerobic adhesive for thread sealing of hydraulic and pneumatic threads up to M20 – 3/4". The high-viscosity thread sealant is suitable for threaded connections up to M20 and is temperature-resistant up to +150°C. Recommended for pneumatic and hydraulic screw connections. High viscosity / medium strength / brown Immediate sealing at low pressure loads Pressure-resistant after curing for medium-strength connections

Anaerobic adhesive for securing screws and nuts. Once cured, the joints are medium strength and can be dismantled normally. The high-viscosity screw lock is suitable for large screws up to M36 and can also be used on slightly oily surfaces. High viscosity / medium strength / blue High resistance to many chemicals Protection against corrosion, vibrations, water, gases and oils

High-strength, anaerobic adhesive for securing screws, nuts, stud bolts, bushings and bearings. Once cured, the joints are high-strength and difficult to dismantle. The medium-viscosity threadlocker is suitable for screws up to M20 and is temperature-resistant up to +200°C. Recommended for non-detachable connections. Medium viscosity / high strength / green High resistance to many chemicals Protection against corrosion, vibrations, water, gases and oils

PSF Lube  PSF Lube is a lubricant and grease spray developed for demanding applications in industry, trade and household use. This high-quality product provides long-lasting lubrication and reliable protection for a wide range of mechanical components and surfaces.

The self-sealing and insulating repair tape is characterised by its high elasticity and weather resistance. Cables, pipes and conduits can be immediately and permanently protected against moisture and corrosion.

TP4 plastic adhesive is a fast-curing adhesive based on acrylate. Specially developed for bonding plastics such as PE (HDPE and LDPE), PP, PVC, PTFE and ABS to each other or to other materials such as metals. Transparent Fast curing at room temperature High tensile strength and impact resistance No surface pre-treatment with primer or plasma Excellent bonding of low-energy plastics Contains micro-particles for adhesive gap control Colour: colourless, translucent Packaging: double cartridge