Technical Sprays
Highly effective technical sprays for a wide range of applications: cleaning, corrosion protection, lubrication, and more
Our technical sprays provide optimal solutions for a variety of applications. They thoroughly clean components, effectively remove corrosion and dirt, reliably lubricate drive elements, seal surfaces, and perfectly prepare materials for further processing. Whether for metal, plastic, or other materials – you will find the right spray product for every application area with us. Trust in quality and efficiency with our specialized sprays!
Your contact for technical sprays
Sebastian Coché
Phone: +49 2564 9317 - 11
E-Mail: service@polytec-vreden.de
Technical sprays provide versatile solutions for cleaning, corrosion protection, lubrication, sealing, and surface preparation. They are suitable for various materials, such as metal and plastic, and deliver efficient, reliable results across a wide range of applications.
Simply request your desired product using our enquiry form.
Anti-corrosion wax - 400 ml
Anti-corrosion wax - 400 mlAnti-corrosion wax is used in various applications, including:Automotive industry: Protection of vehicle bodies and frames from rust and corrosion.Marine application: Preservation of ship hulls, boats and marine equipment to protect them from salt water and corrosion.Metalworking: Protection of metal parts, tools and machines against oxidation and rust.Electronics: Application of wax on printed circuit boards or electronic components to protect them from moisture and corrosion.General industry: Protection of machines, equipment and metal structures in various industrial sectors against environmental influences and corrosion.The application of anti-corrosion wax usually requires the following steps:Cleaning: Ensure that the surface is clean and free of dirt, rust or oil. If necessary, use cleaning agents to clean the surface.Preparation: Dry the surface thoroughly before applying the wax to ensure optimum adhesion.Application: Apply the wax evenly to the surface. This can be done by spraying, brushing or dipping, depending on which product you are using.Allow to cure: Allow the applied wax to cure according to the manufacturer's instructions. This may vary depending on the product and ambient temperature.Refinishing: Check the coating as required and apply additional wax if necessary to ensure complete coverage.
from €8.69*
Anti-Seize Ceramic Spray - 400 ml
Polysion Anti-Seize HT1400 is a high-performance, temperature-resistant lubricant. As an assembly spray, it protects against contact corrosion in active metals. has a very good separating effect and is metal-free. Due to its mineral-based active ingredients, it is temperature-resistant up to 1400°C. It prevents seizing and cold welding caused by friction, wear and corrosion. Properties : High temperature resistanceEffective corrosion protection Excellent adhesion and lubrication propertiesPressure resistant Resistant to gases, acids, salts and alkalisPrevents electrochemical corrosion
from €8.82*
Anti-seize copper pastes
Anti-seize copper pastes
Anti-Seize Copper Paste is an indispensable lubricant for applications exposed to high loads and extreme conditions. This high-quality copper paste offers excellent protection against corrosion, wear and seizure, making it ideal for use in industry, vehicle construction and maintenance.
from €30.59*
Brake cleaner - 500 ml
Effective cleaner and degreaser for components, brakes, clutch parts and metallic surfaces. Removes oils, greases, brake fluid and abrasion. Repeat the process for stubborn dirt. Properties : Powerful spray jet Cleans and degreases Free from lead, cadmium, acetone, toxic and corrosive substances Purity 99.9%
from €1.95*
Chain and rope spray
Chain and rope spray is usually applied as follows :Cleaning : Clean the chain or rope thoroughly to remove dirt, dust and old lubricant residues. A suitable cleaning agent or cleaning spray can help with this.Drying : Allow the cleaned chain or rope to dry completely before applying the spray.Preparation : Shake the can of chain or rope spray well to mix the ingredients.Application: Spray the spray evenly onto the chain or rope. Maintain a reasonable distance to ensure an even coating. Turn the chain or move the rope to ensure that the spray reaches all areas.Leave to soak in : Leave the spray to soak in according to the manufacturer's instructions. It usually takes a few minutes to penetrate and lubricate. Remove excess : Wipe off any excess spray with a clean cloth to prevent excessive build-up.Follow-up : Check the chain or rope and apply additional spray if necessary, especially after prolonged use or if they have been subjected to heavy wear.Regular application of chain and rope spray helps to extend their service life and maintain their performance. Again, follow the specific instructions for the product for optimal results.Chain and rope sprays are used in various areas :Vehicles : For lubricating and maintaining motorcycle chains, bicycle chains and other drive mechanisms. Industry and mechanical engineering : For maintaining and lubricating industrial chains, conveyor belts, ropes and machine parts to reduce friction and minimise wear.Marine : For lubricating ship rigging, boat winches and other marine applications to prevent corrosion and wear caused by salt water. Agriculture : For the care and lubrication of agricultural machinery, such as tractor chains and other moving parts, to ensure smooth operation. Household and DIY projects : For the maintenance of garage doors, garden tools and other household appliances with moving parts. These sprays serve to reduce friction, extend the service life of the treated parts and prevent corrosion by forming a protective layer.
from €9.72*
Citrus assembly cleaner - 500 ml
Polysion Citrus Cleaner degreases quickly and effectively. Dirt, oils, greases, resin, tar, abrasion and much more. Cleans various surfaces such as metals, plastics, painted or coated. Properties : Specially neutral combination of active ingredientsNon-corrosive Effortlessly removes adhesive residues and dirt
from €8.28*
Citrus assembly cleaner - 500 ml
Polysion Citrus Cleaner degreases quickly and effectively. Dirt, oils, greases, resin, tar, abrasion and much more. Cleans various surfaces such as metals, plastics, painted or coated. Properties : Specially neutral combination of active ingredientsNon-corrosive Effortlessly removes adhesive residues and dirt
from €8.28*
Cold spray - 400 ml
Our cold spray provides fast and effective cooling for numerous applications. In industry and trade, it is used for targeted cooling of materials, for fitting components or for troubleshooting electronic components. The special cooling mixture creates an intense cooling effect within seconds, which acts precisely on the desired surface. Cold spray is ideal for use on metals, plastics and electronic components without damaging them. It is an indispensable tool for technicians, electronics engineers and fitters. Whether for maintenance, repair or cooling – cold spray is versatile and provides reliable support for professional tasks.
from €7.35*
Compressed air spray - 400 ml
Compressed air spray - 400 ml Compressed air is a special spray used in numerous industries to perform cleaning tasks efficiently and thoroughly. Compressed air sprays are ideal for removing dust, dirt and other contaminants from sensitive surfaces without leaving any residue.
from €11.73*
Elektro-Reiniger
Der Polysion Elektro-Reiniger ist ein Präzisionsreiniger auf Isopropanolbasis für elektronische Bauteile. Er entfernt Schmutz, Staub und Verharzungen und entfettet verschmutzte Kontakte – ideal für Wartungs- und Reinigungsarbeiten in Industrie und Werkstatt.Die kunststoffverträgliche Formulierung reinigt schnell und effektiv, ohne Rückstände zu hinterlassen. Durch die Reinigung verschmutzter Kontakte kann sie verschmutzungsbedingte Spannungsabfälle reduzieren.Ihre Vorteile auf einen Blick:Reinigt und entfettet elektrische KontakteEntfernt Schmutz, Staub und VerharzungenHinterlässt keine RückständeKunststoffverträglichFür elektronische Bauteile und feinmechanische PräzisionsteileDer Elektro-Reiniger eignet sich für Kontakte, Buchsen und spannungsfreie elektrische Anlagen. Nur an spannungsfreien Bauteilen anwenden und vor der Wiederinbetriebnahme vollständig ablüften lassen.
from €7.59*
Industrial spray adhesive, permanent - 500 ml
Permanent bonding on rough and uneven surfaces. Particularly suitable for large-area bonding. Properties : Special adjustable spray head (clean and fine spray pattern) High, immediate adhesive strength for permanent bonding Adheres to almost all surfaces Permanent bonding Very good moisture and heat resistance
from €10.36*
Industrial spray adhesive, permanent - 500 ml
Permanent bonding on rough and uneven surfaces. Particularly suitable for large-area bonding. Properties : Special adjustable spray head (clean and fine spray pattern) High, immediate adhesive strength for permanent bonding Adheres to almost all surfaces Permanent bonding Very good moisture and heat resistance
from €11.33*
Label remover
Polysion Label Remover removes labels, stickers and stubborn adhesive residues. Its special combination of active ingredients, based on citrus peel extract, cleans and degreases quickly and thoroughly. It can also be used to remove oils, greases, resins, tar and abrasion marks.The non-corrosive formulation evaporates quickly and leaves no residue – ideal for cleaning tasks in industry, assembly and workshops, as well as for preparing suitable bonding surfaces. Your benefits at a glance:Removes labels, stickers and adhesive residuesAlso removes oil, grease, resin and tarCleans and degreases quickly and effectivelyNon-corrosiveEvaporates quickly without leaving any residue The label remover is suitable for metals, plastics and painted or coated surfaces. Check material compatibility before use.n
from €7.20*
Multifunctional Spray PS51
Cleans, protects and maintains in one step. Undermines rust and forms a wafer-thin, antistatic protective film on the surface. Properties : Rust remover, lubricant, contact spray, cleaner and corrosion protection in one Free of silicones and resin Forms a fine protective film
from €4.11*
P99 Plastic Cleaner – 400 ml
Gently cleans and degreases plastic and painted surfaces. The gentle formula is designed to clean delicate surfaces and prevents damage to the surface structure. Properties: For delicate surfaces; evaporates without leaving any residue or streaks High cleaning power for preparing bonding surfacesHigh-quality spray nozzle for fine atomisation
from €7.59*
Primer CA
Primer CA
Our Primer CA is a high-performance adhesion promoter for professional surface preparation in the chemical-technical industry. The product specifically improves adhesion and makes a significant contribution to the long-term stability of coatings, adhesives and sealants.Primer CA is used wherever the highest demands are placed on adhesive strength and chemical resistance - for example on metals, plastics or technical composite materials. The application of the primer ensures a reliable bond between the substrate and the subsequent layer - even under extreme conditions. Thanks to its versatility, Primer CA is ideal for industrial applications in adhesive bonding technology, surface coating, plastics processing and many other areas.
Price on request
PSF Lube - 400 ml
PSF Lube PSF Lube is a lubricant and grease spray developed for demanding applications in industry, trade and household use. This high-quality product provides long-lasting lubrication and reliable protection for a wide range of mechanical components and surfaces.
from €9.50*
PTFE Dry - 400 ml
Polysion PTFE Spray is used as a highly effective dry lubricant and grease-free permanent lubricant for slide rails and guide rails. The high PTFE content reduces the coefficient of friction. The PTFE spray is grease-free, water-repellent and anti-adhesive. Properties : High temperature resistance Reduces the coefficient of friction Does not attract dirt and dust Penetrates into the smallest areas Free of mineral oil and silicone
from €9.44*
Rostlöser und Kontaktspray - 450 ml
Der POLYSION Rostlöser + Kontaktspray ist ein vielseitiges technisches Spray für Wartungs-, Reparatur- und Instandhaltungsarbeiten in Industrie, Werkstatt und KFZ-Bereich. Dank seiner guten Kriecheigenschaften und hohen Kapillarwirkung dringt der Rostlöser auch in schwer erreichbare Zwischenräume ein und unterstützt dabei, festgerostete und korrodierte Verbindungen wieder gängig zu machen.Das Spray eignet sich unter anderem zum Lösen von festgerosteten Schrauben, Muttern und Bolzen. Gleichzeitig kann es zur Schmierung von Ketten, Scharnieren, Bowdenzügen und Gleitflächen eingesetzt werden. Ein Rostschutzadditiv hilft dabei, behandelte Oberflächen vor Rost, Oxidation und Korrosion zu schützen. Darüber hinaus kann das Spray Festfressen sowie störende Quietsch- und Knarrgeräusche reduzieren.Die Formulierung basiert auf Mineralöl und Kohlenwasserstoffen mit MoS². Das Produkt ist farblos und wird in der praktischen 450-ml-Spraydose geliefert.Produktvorteile auf einen Blick:Löst festgerostete Schrauben, Muttern und BolzenGute Kriecheigenschaften und hohe KapillarwirkungMit MoS²-Bestandteilen und RostschutzadditivSchmiert Ketten, Scharniere, Bowdenzüge und GleitflächenSchützt vor Rost, Oxidation und KorrosionUniversell für KFZ, Werkstatt und Industrie
Price on request
Sealant and adhesive remover - 400 ml
Polysion sealant and adhesive remover removes paint, adhesive and sealant residues. Also removes solid seals from cylinders and similar components. Specially thickened to ensure a long service life, even on vertical surfaces. Properties : Dissolves stubborn adhesive and sealant residues Adheres to vertical surfaces Fast-acting Free from dichloromethane
from €9.66*
Sensitive cleansers
Our mild, universally applicable Sensitive Cleaner is ideal for safely removing dirt and grease deposits without damaging sensitive surfaces. Perfect for adhesive pre-treatment, it ensures gentle and thorough cleaning. Particularly suitable for sensitive materials, Sensitive Cleaner offers effective cleanliness with maximum material protection.
from €8.09*
Silicone grease
Our silicone grease has been specially developed for the lubrication and maintenance of seals and O-rings. It is physiologically safe and does not attack plastics. Properties:Suitable for drinking water (odourless and tasteless)Suitable for food contact in accordance with DIN V 10517 Does not attack NBR and EPDM sealsResistant to many chemicalsTemperature-resistant, high-adhesion
from €6.80*
Special foam cleaner - 400 ml
Powerful universal cleaner softens dirt with foam and dissolves stubborn stains. Properties : Environmentally neutral and biodegradable No caustic or corrosive additives
from from €5.60*
Special foam cleaner - 400 ml
Powerful universal cleaner softens dirt with foam and dissolves stubborn stains. Properties : Environmentally neutral and biodegradable No caustic or corrosive additives
from from €5.60*
Information on technical sprays
Technical sprays are specialised aerosol products used for maintenance, care, cleaning, lubrication, protection, or assembly. They are used in industry, skilled trades, workshops, households, and many technical applications to treat surfaces and components precisely.
Depending on the product, technical sprays are suitable for cleaning, degreasing, lubricating, loosening, protecting, maintaining, insulating, or preserving. Typical applications include the maintenance of machines, tools, vehicle parts, electrical contacts, metal surfaces, plastic components, or moving parts.
Common types of technical sprays include cleaning sprays, contact sprays, silicone sprays, PTFE sprays, rust removers, lubricating oil sprays, zinc sprays, corrosion protection sprays, adhesive removers, and compressed-air sprays. The appropriate product depends on the material, application, and required function.
Depending on the spray, they may be suitable for materials such as metal, plastic, rubber, glass, ceramic, painted surfaces, or electrical components. As not every spray is suitable for every material, the product information should be checked before use, and sensitive surfaces should be tested on an inconspicuous area.
Depending on the application, the surface should be clean, dry, and free from coarse dirt. The spray should be applied evenly from a suitable distance. Good ventilation, compliance with safety and hazard instructions, and use within the product’s intended application are also important.
Technical sprays should be stored in a cool, dry, well-ventilated place and protected from direct sunlight and heat sources. As aerosol cans are pressurised, they must not be exposed to high temperatures or damaged. After use, the can should be securely closed and kept out of the reach of children.