Adhesive Remover

Adhesive remover sprays are technical cleaning products designed to dissolve adhesive residue, label residue, adhesive tape residue, or other sticky deposits from surfaces. They are used when such residues are difficult or messy to remove mechanically.

Adhesive remover sprays are suitable for removing residue left by labels, stickers, adhesive tapes, sealants, assembly adhesives, or adhesive films. Typical areas of application include industry, workshops, trades, assembly, packaging, automotive engineering, and cleaning.

Depending on the product, adhesive removers can be used on materials such as metal, glass, ceramics, painted surfaces, or certain plastics. As sensitive materials, paints, or plastics may be affected, the product should always be tested on an inconspicuous area before use.

The spray should be applied evenly to the adhesive residue and, depending on the product, allowed to work for a short time. The loosened residue can then be removed using a cloth, scraper, or suitable cleaning tool. The surface should then be cleaned again if necessary and allowed to dry completely.

Yes, adhesive removers can help eliminate old adhesive residue before a new bonding process. It is important that the surface is completely clean, dry, and free of residue after application so that new adhesives or adhesive tapes can bond reliably.

Good ventilation, suitable protective gloves, and compliance with all safety and hazard instructions are essential. The spray should not be used on hot surfaces or near ignition sources. Sensitive surfaces should be checked for material compatibility beforehand.